Özellikler - Janitza

Standards	DIN, VDE 0660 part 500, IEC 439-1 and VDE 0560 part 41
Design in accordance with	DIN EN60439 part 1, partially type tested combination
Construction form	Steel plate cabinet for KB and ES versions
	Mounting plate for MP version Module for MO version
power factor controller	Prophi according to data sheet or selection table
Nominal voltage	400V, 50Hz; other voltages upon request
Control voltage	230V, 50Hz
Capacitor voltage	440V at 5,67 - 7%, 525V at 14%
Voltage capacity of the capacitor	at p=5,67-7%	440V	at p=14%	525V
	8 hours each day	484V		577V
	30 minutes each day	506V		604V
	5 minutes	528V		630V
	1 minute	572V		682V
Power losses	Capacitors <0.3 W/kvar, units 4-7kvar

Anlagen-Ausführung	Permitted harmonic currents		harmonic voltage
	I250Hz	I350Hz	U250Hz	U350Hz
FK 5,67	0,565 IN	0,186 IN	5%	5%
FK 7	0,31 IN	0,134 IN	5%	5%
FK 14	0,086 IN	0,051 IN	5%	5%
Capacitor protection switch cycles	Max 100,000 switch cycles
Optional thyristor actuator	Unlimited
Current transformer connection	.. /1A, .. /5A
Nominal power/nominal current	Refer to option overview
Standard ratio	Refer to option overview
Discharge	With discharge resistance in accordance with EN60831-1/2
Installation height	Up to 2000m above sea level
Environmental temperature	According to DIN EN 60439 part 1
Protection class	KB, ES: IP 32 and MP, MO: IP00
Cooling	Self-ventilating or forced ventilation depending on type
Colour	KB, ES: RAL 7032 bzw. RAL 7035, MP, MO: verzinkt
Noise emissions (FK)	<60dB at a distance of 1m from the closed unit
Connection diameters and fuses	Refer to option overview

Harmonik Filtresiz Kompanzasyon